FP-8159-2-BAR Z Max 2026 Handlebar Trolley
FP-8159-2-BAR Z Max 2026 Handlebar Trolley
FP-8159-2-BAR Z Max 2026 Handlebar Trolley
FP-8159-2-BAR Z Max 2026 Handlebar Trolley
FP-8159-2-BAR Z Max 2026 Handlebar Trolley
FP-8159-2-BAR Z Max 2026 Handlebar Trolley
FP-8159-2-BAR Z Max 2026 Handlebar Trolley
FP-8159-2-BAR Z Max 2026 Handlebar Trolley

FP-8159-2-BAR Z Max 2026 Handlebar Trolley

FP-8159-2-BAR-RED

MSRP
Regular price$103.18
/
Shipping calculated at checkout.

The Z-Max 2026 trolley uses carbon-steel side plates, stainless-steel sheaves and sealed stainless-steel bearings for travel on compatible rope or cable. A split-open bottom with a locking closure supports installation, while a soft-grip handlebar and finger guards provide hand contact points. Minimum breaking strength is 45 kN.

 

• Product Number: FP-8159-2-BAR

 

Body and Running System

• Material: Carbon-steel side plates with stainless-steel sheaves and bearings.

• Sheaves and Bearings: Stainless-steel sheaves with dual sealed stainless-steel bearings.

• Attachment Points: Two attachment points: upper and lower openings aligned through the two side plates.

• Operation: Split-open bottom with locking closure for line installation. Fully close and secure the body before loading.

• Additional Features: Soft-grip handlebar for hand positioning and orientation, with finger guards.

• Intended Use: Commercial zipline parks and private zipline installations with a compatible, professionally designed system.

 

Rope Cable and Size

• Rope Compatibility: 9–13 mm.

• Cable Compatibility: 8–12 mm.

• Dimensions: Body width: 135 mm (5.31 in); body height: approximately 145 mm (5.71 in); inside plate spacing: 20 mm (0.79 in); each plate: 4 mm (0.16 in).

• Weight: Approximately 3.2 lb / 51 oz.

• Colors: Red, Black.

 

Performance and Standards

• Maximum Speed: 20 m/s (72 km/h).

• Minimum Breaking Strength: 45 kN.

• Standard: meets CE EN 12278.

 

System Compatibility and Essential Use

• Rider Connection: For rider transport, a correctly fitted, appropriately certified harness, a compatible rated lanyard and certified locking connectors suitable for the intended use are required.

• Handlebar Use: Handles assist hand positioning and orientation only. Never suspend yourself solely by holding the handles; the harness and lanyard must support your weight. Keep hands clear of the cable and sheaves, and do not use your hands to brake on the line.

• Attachment and Backup: Use the designated load-bearing attachment points and the backup arrangement specified by the course designer. Keep connectors correctly oriented and locked, without gate loading or interference with moving sheaves.

• Course Compatibility: A qualified operator must verify the complete setup, including the line, rider connection and speed-control/braking system. The trolley alone is not a complete zipline system.

• Before Use: Read the product instructions. Check the trolley condition, secure connections and free sheave rotation before each use.

 

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.