Where Is the Safety Label Located on a Harness or Lanyard?

A Complete Guide for Inspectors & Safety Managers

In fall protection, traceability is everything.

During audits, jobsite inspections, or internal safety reviews, one of the first things inspectors look for is the manufacturer’s safety label. Without it, equipment may be removed from service — even if it appears unused.

At Fusion Climb, we design our labeling system to meet ANSI requirements while protecting critical information from jobsite wear.

Here’s exactly where to find the safety label on our harnesses and lanyards — and what information inspectors should expect to see.

What Information Is on a Fall Protection Safety Label?

A compliant ANSI Z359 label includes:

Production date
Manufacturing batch / lot number
Item / model number
Applicable ANSI standards
Capacity rating
Manufacturer identification
Inspection warnings

If the label is missing or illegible, the equipment may be removed from service.

Full Body Harness – Label Location

On Fusion Climb full body harnesses, the safety label is located:

At the back of the harness
Inside the shoulder strap area
Under a protective Velcro flap
Positioned on the inside panel of the shoulder straps

Why It’s Placed There

We position the label:

Away from high-abrasion zones
Protected from UV exposure
Shielded from debris and jobsite contaminants
Easily accessible for inspectors

The Velcro flap protects long-term legibility while allowing quick inspection access.

Half Body Harness & Belt – Label Location

For Fusion Climb half body harnesses and belts, the label is located:

At the waist section
On the inside of the belt
Positioned for inspection visibility while remaining protected during use

Lanyards (With or Without Shock Pack) – Label Location

On Fusion Climb lanyards, whether:

With a shock pack
Without a shock pack
Single leg or twin leg

The safety label is located at:

One end of the lanyard
Near the connector or attachment point

Depending on the width and construction of the lanyard, the label may be:

Exposed for visibility
Protected under a Velcro shock pack cover

Wider web lanyards typically include a protective Velcro sleeve to preserve label integrity.

What Information Is Printed on the Safety Label?

Fusion Climb safety labels contain critical compliance and traceability data, including:

✔ Production Date

Indicates manufacturing date to determine service life.

✔ Manufacturing Batch / Lot Number

Used for:

Traceability
Quality assurance
Recall identification (if necessary)

✔ Item / Model Number

Allows verification of:

Product specifications
Compliance standards
Correct application

✔ Applicable Safety Standards

May include:

ANSI Z359
OSHA compliance references
Other relevant certifications

✔ Capacity Rating

Indicates maximum rated working load including tools and equipment.

✔ Manufacturer Identification

Confirms authenticity and origin of manufacture.

Inspection Checklist for Safety Managers

During routine or documented inspections, verify:

✔ Safety label is present
✔ Label is legible
✔ Production date is within allowable service life
✔ Batch number is readable
✔ No alterations or damage to identification tag
✔ Impact indicator has NOT been activated
✔ Webbing and stitching are intact

If a label is missing or unreadable, most ANSI-compliant programs require the equipment to be removed from service.

Why Label Protection Matters

Fall protection equipment is exposed to:

Abrasion
UV radiation
Moisture
Dirt and debris
Chemical contaminants

Fusion Climb’s protected label placement helps extend legibility while ensuring compliance readiness during inspections or audits.

Because when OSHA shows up, you don’t want to be guessing.

Built for Compliance. Designed for Accountability.

Traceability protects workers.
Clear labeling protects employers.
Impact indicators protect inspection integrity.

At Fusion Climb, we engineer our harnesses and lanyards to support real-world jobsite conditions while meeting ANSI inspection standards.

When safety and compliance matter, details matter.

Need Help Identifying Your Equipment?

If you need assistance verifying:

Harness model numbers
Applicable ANSI standards
Impact indicator function
Inspection requirements
repair or sewing of the damaged labels

Our team is ready to help.

Regulatory References & Industry Resources

Fall protection equipment labeling, inspection, and removal-from-service procedures must align with both federal regulations and industry consensus standards.

The following resources provide authoritative guidance relevant to equipment identification, traceability, and inspection protocols:

1. OSHA Fall Protection Overview

Agency: Occupational Safety and Health Administration

OSHA establishes regulatory requirements for fall protection in construction and general industry. These regulations outline employer responsibilities for fall hazard mitigation, equipment inspection, and worker protection.

Reference:
OSHA Fall Protection Standards
https://www.osha.gov/fall-protection

2. ANSI/ASSP Z359 Fall Protection Code

Standard: ANSI Z359

The ANSI/ASSP Z359 Fall Protection Code establishes performance, labeling, inspection, testing, and removal-from-service criteria for personal fall arrest systems.

The standard addresses:

Equipment identification requirements
Labeling and traceability expectations
Inspection frequency
Post-fall removal procedures

Overview Resource (Administered by ASSP):
https://www.assp.org/standards/standards-topics/fall-protection

Compliance Disclaimer

This article is provided for educational purposes only and does not replace employer responsibility to comply with applicable OSHA regulations, ANSI standards, and company-specific fall protection policies. Always consult current regulatory requirements and a qualified safety professional when developing or implementing a fall protection program.